Plastic crusher, also known as plastic crusher, is widely used in the plastic waste industry because of its powerful function, which has become an indispensable part of these owners. because of long-term work, plastic crushers sometimes strike. in order to improve our production quality and output, how should we usually maintain the plastic crushers?
I'd like to introduce how to maintain our plastic crusher. when we install the machine, we should install it in a ventilated place to ensure the heat dissipation of the motor and extend its life; we also need to check whether the screw of the cutter is loose to prevent damage of the cutter; regularly fill the bearings with lubricating oil to ensure the lubrication between bearings; in order to ensure the sharpness of the cutter cut, the cutter should be checked frequently to ensure its sharpness and reduce unnecessary damage to other parts due to blunt blade.
i. preparation before startup
1. connect the power supply correctly to ensure that our machine can start normally
2. to check whether there are abnormal sundries in the unit room, you can first move the inertia wheel by hand
3. if there is no problem after inspection, start the machine normally
ii. use in work
1. when the machine is working, it is forbidden to put metal and other hard objects into the crushing chamber
2. in case of abnormal response during the operation of the machine, stop the machine immediately, turn off the power supply, check the cause, and restart the machine after troubleshooting.
iii. do not feed 5 minutes before the shutdown. the remaining materials in the crusher room should be completely crushed and unloaded before the shutdown,
To prevent the negative operation of the machine when di starts up the next day.
The above is the maintenance of the plastic grinder we introduced to you. please pay attention to the maintenance of the machine and avoid unnecessary losses.